This HF-CDJ-TH3-AMK-R3 Bluetooth harness adapter is designed for 2007+ amplified or non-amplified Dodge vehicles using AVTEK Bluetooth car kits.


Our HFVT Bluetooth harness adapter HF-CDJ-TH3-AMK-R3 is designed for the following vehicles using the AVTEK Bluetooth car kit:



Model                     Start Year  End Year  Comment                  
CHARGER 2011 2014 ALL
DART 2013 2016 ALL w/o Bluetooth
JOURNEY 2011 2017 ALL

IMPORTANT NOTICE: As always HFVT recommends that you check behind the radio to confirm the connector.  In some early 2014 Dodge Journeys the harness that is needed is the HF-CDJ-TH3-AMK.

NOTE:  IF YOU ARE USING THE PARROT ASTEROID MINI OR TABLET, YOU MUST USE THE HF-MOLEX-ISO HARNESS.  If you connect the AMK harness directly in the Parrot Asteroid, you may cause damage to the Parrot Mini or Tablet.

NOTE: On some Chrysler vehicles, the front and rear speaker leads are reversed in relation to where the Parrot kit is expecting them and so you will need to use the R3 (HF-109) pigtail.

We try our best to make sure that the information on our website regarding the Bluetooth harness adapter solution for vehicle make, model, year and Bluetooth hands-free car kit is as accurate as possible and that you are ultimately responsible for making sure you have the correct Bluetooth harness adapter for your vehicle.  Please note some vehicles may require alternate solutions.  We encourage you to check all information regarding your vehicle type prior to making your selection. HFVTs maximum liability is limited to the original cost of the product(s) purchased. Thank you for choosing HFVT and we look forward to serving you.


Contact Us