By: Parrot Bluetooth Car Kit
HF-FD-THP2-AMK

This HF-FD-THP2-AMK Bluetooth harness adapter is designed for non-amplified Ford using Parrot MKi9000, MKi9100, MKi9200 Bluetooth car kits. If your vehicle has a Visteon NAV headunit, Mach, Shaker, or a THX sound system, this harness will not work.

$49.95

Our HFVT Bluetooth harness adapter HF-FD-THP2-AMK is designed for the following vehicles using the Parrot Bluetooth car kit:

FORD (NON-AMP)

Model                             Start Year  End Year  Comment                                    
CROWN VICTORIA 2004 2012  
ECONLINE 2005 2013  
EDGE 2007 2010  
ESCAPE 2005 2013  
EXPEDITION 2004 2015 NO MUTE BUTTON ON FACE
EXPLORER 2004 2010  
F150 2004 2016 Very Basic Radio-Regular Radio
F250 2005 2016  Base Model
F350 2005 2016  Base Model
F450 2005 2016  Base Model
F550 2005 2016  Base Model
FLEX 2009 2013  
FOCUS 2005 2011  
FORD 500 2005 2008 ALL MODELS USING THE PARROT MKi
FREESTAR 2010 2013  
FREESTYLE 2010 2013  
F-SERIES 2004 2013  
FUSION 2007 2012 NO VOL BUTTON ON STEERING WHEEL
MUSTANG 2005 2014  
TAURUS 2008 2012  
TAURUS X 2008 2012  
THUNDERBIRD 2004 2006  
TRANSIT CONNECT 2012 2013  

NOTE:  The 2012-2013 TRANSIT CONNECT VAN normally require the HF-FD-THP2-AMK harness. We recommend that you look at the vehicles radio connection to confirm prior to ordering.

NOTE: If your vehicle has a Visteon NAV headunit, Mach, Shaker or a THX sound system, this harness will not work. 

NOTE: Some 2009-2012 Ford vehicles require the red line to be connected directly to a 12 Volt switched power source to gain power. This new harness allows you to make that direct connection by simply disconnecting the male bullet to the red power line on our harness and connecting the male bullet into a 12 Volt switched power source on the vehicle. If the vehicle does not require this step, leave the male bullet connected into the HF-FD-THP2-AMK harness.

NOTE: Some 2004 Ford style vehicles - such as the 2004 or 2005 Explorer or 2 door Sport/Sport Trac using the 16 pin type harness may need the HF-THC1-AMK harness. The HF-FD-THP2-AMK-ISO is for a non-amplified vehicle. If you have an amlified vehicle, NAV or mute button on the radio, you may need to use our HF-FD-AMP2. We recommend that prior to purchasing your harness that you look in the back of hte radio to determine the harness that you will need to us.

We try our best to make sure that the information on our website regarding the Bluetooth harness adapter solution for vehicle make, model, year and Bluetooth hands-free car kit is as accurate as possible and that you are ultimately responsible for making sure you have the correct Bluetooth harness adapter for your vehicle.  Please note some vehicles may require alternate solutions.  We encourage you to check all information regarding your vehicle type prior to making your selection. HFVTs maximum liability is limited to the original cost of the product(s) purchased. Thank you for choosing HFVT and we look forward to serving you.

 

 


Questions?

Contact Us

X