HFVT Products: Blind Spot Camera/Mirror Set > HF-BSC-1 and HF-7.3-3WM
By: Hands Free Vehicle TechnologyHF-BSC-1 (blind spot camera) Features:
- Current consumption: MAX: 150mA
- Sensor: CMOs
- Resolution (TV lines): 480
- Minimum Illumination: 0.3 Lux
- Angle: 170º
- Effective pixels: 648*488
- TV system: NTSC
- Video output: Full color video out: 1.0Vp-p 75 (ohm) load
- Working voltage: DC 9-16v
- Video color: full color
- Wter proof: IP67-IP68
- Operating Temperature: -30ºC to +70ºC
- Parking guard line: On/Off Switchable
- Image: Mirror/Non-Mirror Switchable
HF-7.3-3WM Features:
- Backup mirror display
- Three video input
- 1280*400 resoution
- Automatic brightness adjustment
- Supports panoramic reversing display
- Automatic LCD backlight brightness adjustment
- Split screen and full screen mode switch
- <15w power consumption
- Adjustable guideline with remote
-
Mirror Adjustment
After the HF-7.3-3WM is powered up under normal use, the LCD brightness will change by the ambient light. It will be automatically adjusted to the brightness in the daytime, and readjust for the correct brightness at night.
Rearview Mirror Connectivity:
Rearview mirrors need to be connected to the ACC, GND, the BACK for the power and the controlling of the reverse camera display.
NOTE: While in drive mode, the car monitor can display left and right video to facilitate drivers to observe the condition of the rear (there will be different video displays on mirror according to the placements of the cameras).
When placing vehicle in reverse, the rearview mirror will display full screen reversing image.