HFVT Products: Bluetooth Harnesses > Audi Adapters > HF-BNZ-TH1-AMK-AMP4.1
By: Parrot Bluetooth Car Kit
This HF-BNZ-TH1-AMK-AMP4.1 Bluetooth harness adapter is designed for amplified Audi vehicle using the Parrot CK3000. CK3100, MKi9000, MKi9100, MKI9200 Bluetooth car kits.
Our Bluetooth harness adapter HF-BNZ-TH1-AMK-AMP4.1 is designed for the following vehicle using the Parrot Bluetooth car kit:
AUDI
| Model | Start Year | End Year |
| A4, S4, RS4 | 1995 | 2000 |
| A6 w/NAV | 1994 | 2000 |
| TT | 1999 | 2000 |
Note: The A3 and A4 w/o NAV for the year 2004-2006 do not require a harness.
IMPORTANT INFORMATION: If you are using a Parrot Asteroid, please do not plug the HFVT 24 pin of the T-harness directly to the Asteroid firmware. By doing so, you may cause damage to the car kit. You will need to use our HF3-31 AMP adapter and the harness provided with the Parrot Asteroid to make the connection.
We try our best to make sure that the information on our website regarding the Bluetooth harness adapter solution for vehicle make, model, year and Bluetooth hands-free car kit is as accurate as possible and that you are ultimately responsible for making sure you have the correct Bluetooth harness adapter for your vehicle. Please note some vehicles may require alternate solutions. We encourage you to check all information regarding your vehicle type prior to making your selection. HFVTs maximum liability is limited to the original cost of the product(s) purchased. Thank you for choosing HFVT and we look forward to serving you.